排序方式： 共有39条查询结果，搜索用时 15 毫秒
21.
AbstractThis article presents a study of liquefaction resistance behaviour of sand using a cyclic triaxial test. The site investigation was performed, and frozen undisturbed specimens were taken from the Izumio site in Osaka, Japan. According to the evidence in 1995 Kobe Earthquake, the first two sand layers are vulnerable to undergo liquefaction. The effect of deviatoric stress on liquefaction resistance was focused on in this study. The excess pore pressure ratio, hysteresis loop, and effective stress path from the cyclic triaxial tests were reported. A multispring element model was employed to simulate the soil behaviour under cyclic loading. The results showed that applied deviatoric stress could influence the liquefaction resistance of sandy soil samples. The plots of the cyclic stress ratio versus the number of cycles to generate liquefaction known as a liquefaction resistance curve can be then constructed and compared with other sands. 相似文献
22.
Mikio Shimizu 《Astrophysics and Space Science》1977,51(1):241-243
The argument for the similarity of the composition of cometary volatiles to that of interstellar molecules has been strengthened by the analysis of CO+ and CO
2
+
emission of the comet West. The strong 6300 Å emission of oxygen atoms can be interpreted in terms of photodissociation of OH by the solar Lyman-alpha radiation, and not as being due to photo-dissociation of CO2 of speculatively large amount. 相似文献
23.
Volume Contents
Table of Contents 相似文献24.
Tatsuya Oki Mikio Kobayashi Shuji Owada Daiki Matsuura 《International Journal of Mineral Processing》2007
An equal settling ratio is an important factor in estimating particle separation accuracy. However, this factor is often calculated using the settling velocity in stationary water, there are no examples of calculation of the equal settling ratio in an actual separator. This is difficult because particle movement in a separator is very complicated, and even simple periodic motions, such as the oscillation field used with many separators, are ignored in many cases. The authors have previously reported on the relation between the equal settling ratio and the oscillation frequency by analysis of particle movement in vertically oscillating water, using spherical particles of glass (average size 435 μm) and zirconia (202 μm) which have the same settling velocity in stationary water. In this study, the influence of particle diameter on the change in the settling velocity in oscillating water was experimentally investigated for three pairs of glass and zirconia particles having different sizes under 0.5 mm, which have the same settling velocity in stationary water. The settling velocities of different-sized particles decreased at different rates in oscillating water, indicating that the equal settling ratio is reduced by water oscillation. We conclude that water oscillation improves the accuracy of size separation for glass particles over 300 μm and zirconia particles over 150 μm when glass and zirconia particles are separated from each other with the difference of these settling velocities. 相似文献
25.
Abstract Extensional basin formation and subsequent basin inversion in the southern area of the eastern margin of the Japan Sea were studied on the basis of the interpretation of seismic profiles (total length approximately 15 000 km) and the fossil analyses of 77 sea-bottom samples. Rift (Early to Early Middle Miocene), post-rift (Middle to Late Miocene), pre-inversion (Late Miocene to Pliocene) and inversion stages (Pliocene to Quaternary) were differentiated by the extension and contraction of the crust. Many small-scale rifts were formed in the Sado Ridge and the Mogami Trough during the rift stage, simultaneous with back-are spreading of the Japan Sea. Most of the rifts were east- or southeast-facing, rotational half-grabens bounded by west-dipping normal faults at their eastern boundaries. The syn-rift sequence can be divided into lower and upper units by an erosional surface. The sequences are presumed to be composed mainly of fining-upward sediments. The trend of most rifts is north-northeast with the remainder being of east-northeast-bias. The north-northeast trending rifts are distributed widely in the Sado Ridge and Mogami Trough and do not show an en échelon arrangement, suggesting that they were formed mainly by pure extension nearly perpendicular to the arc. The east-northeast trending rifts are presumed to have been developed by a north-northwest extension in the late rift stage, which may have accompanied a right-lateral movement in the eastern margin of the Japan Sea. During the post-rift stage, the rifts and adjacent horsts subsided and became covered by the post-rift sequence, characterized by parallel and continuous reflections. This suggested no significant tectonic movements in this period. In the pre-inversion stage many of the rifts subsided again, presumably because of down-warping due to weak compressional stress. The normal faults reactivated as reverse faults during the inversion stage due to an increase in compressional stress. Many of the rifts have been uplifted and transformed into east-vergent asymmetric anticlines. The basin inversion is greatest in the Sado Ridges and in the Dewa Bank Chain, while it is least developed in the Mogami Trough and in the western slope of the Sado Ridge, in which some normal faults have not been reactivated. The increase and decrease of the inversion corresponds to the peak and trough of undulation at an interval of about 50 km trending parallel to the arc. 相似文献
26.
Mikio Nakanish 《Boundary-Layer Meteorology》2001,99(3):349-378
On the basis of data constructed with large-eddy simulation (LES), an attempt is made to improve the Mellor–Yamada (M–Y) turbulence closure model. Firstly, stably-stratified and convective planetary boundary layers without moisture are simulated by a LES model to obtain a database for the improvement. Secondly, based on the LES data, closure constants are re-evaluated and a new diagnostic equation for the master length scale L is proposed. The new equation is characterized by allowing L in the surface layer to vary with stability instead of constant kz, where k is the von Kármán constant, and z is height.The non-dimensional eddy-diffusivity coefficients calculated from the modifiedM–Y model are in satisfactory agreement with those from the LES data. It isfound that the modified M–Y model improves the original one largely, and thatthe improvement is achieved by considering buoyancy effects on the pressurecovariances andby using the newly proposed equation for L. 相似文献
27.
Pinter Nicholas Ishiwateri Mikio Nonoguchi Atsuko Tanaka Yumiko Casagrande David Durden Susan Rees James 《Natural Hazards》2019,96(3):1429-1436
Natural Hazards - On March 11, 2011, a magnitude MW 9.0 thrust earthquake ruptured the Japan Trench along the northwest coast of Honshu and generated a tsunami that killed 15,894 people, left 2585... 相似文献
28.
Ten years of surface weather data from Ocean Weather Station P were subjected to spectral analysis. The wind speed and air pressure auto‐spectra reveal large variations at synoptic periods while the auto‐spectra of the sea temperature, air temperature and absolute humidity are dominated by the annual variations. The rotary auto‐spectrum of the wind features a broad peak of activity centered at a period of 3 days. In addition, the spectra of quantities representative of the wind stress and sensible and latent heat fluxes are discussed. Spectra of these surface weather quantities computed for each season show that the activity changes both with respect to the size and frequency of the variations during the course of a year. The cross‐spectra between selected pairs of quantities were also computed and are discussed. 相似文献
29.
The strain space multiple mechanism model idealizes the behavior of granular materials on the basis of a multitude of virtual simple shear mechanisms oriented in arbitrary directions. Within this modeling framework, the virtual simple shear stress is defined as a quantity dependent on the contact distribution function as well as the normal and tangential components of interparticle contact forces, which evolve independently during the loading process. In other terms, the virtual simple shear stress is an intermediate quantity in the upscaling process from the microscopic level (characterized by contact distribution and interparticle contact forces) to the macroscopic stress. The stress space fabric produces macroscopic stress through the tensorial average. Thus, the stress space fabric characterizes the fundamental and higher modes of anisotropy induced in granular materials. Herein, the induced fabric is associated with monotonic and cyclic loadings, loading with the rotation of the principal stress, and general loading. Upon loading with the rotation of the principal stress axis, some of the virtual simple shear mechanisms undergo loading whereas others undergo unloading. This process of fabric evolution is the primary cause of noncoaxiality between the axes of principal stresses and strains. Although cyclic behavior and behavior under the rotation of the principal stress axis seem to originate from two distinct mechanisms, the strain space multiple mechanism model demonstrates that these behaviors are closely related through the hysteretic damping factor. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
30.
日本东北9.0级地震的同震与震后滑动 总被引：3，自引：0，他引：3
大部分强震都发生在海沟,那里是海洋板块向大陆板块俯冲的地方.大量矩震级MW9.0以上的地震发生在若干区域,包括智利,阿拉斯加,堪察加半岛和苏门答腊岛等.位于太平洋板块俯冲鄂霍茨克板块的日本海沟,历史记载上没有发生过MW9.0地震,除了至今震级还有争议的公元869年Jogan大地震[1](可能超过MW9.0).然而,根据... 相似文献